336x280(권장), 300x250(권장), 250x250, 200x200 크기의 광고 코드만 넣을 수 있습니다.

YouTube 코리아 위치 링크


YouTube(=유튜브) 수익창출 기능 정지

3개월간 저작권 가이드 문제가 발생하지 않았을 시

6개월간의 정지가 풀린다.


정지된 이유는

Busking 공연때 나온 노래가 SM Entertainment 의 노래였다.

신고받았을때 광고수익이 SM으로 흘러간다는 Email이 날아왔는데

동의한다면 이의제기를 하지 않아도 된다는 메세지도 포함되있었다.

그래서 그냥 있었는데 얼마후 파트너 프로그램 정책을 준수하지않아 수익창출 기능이 정지되었다는 메세지가 날아왔다.

참으로 어이없는 정책이 아닐 수 없다.

YouTuber들은 영상 올릴때 특히 SM Emtertainment 같은 기획사의 곡이 아닌지 반드시 확인하기 바란다.

노래를 빼버리던지, 노래를 만들어 넣는 방법도 좋은 방법이라 하겠다.


▼6개월간 정지처분

===========================================================

===========================================================

▼정지먹은 Youtube 컨텐츠의 경우는 3~6개월간 광고 개제가 정지된다.

미등록, 비공개 의 차이점

미등록 : 로그인 없이 볼 수 있다. 링크를 알고있는 사람만 볼 수 있다.

비공개 : 로그인을 해야 볼 수 있다.






개정복구방법

1.계정을 삭제하고 새로 만들기

2.새로 계정을 만들고 사용하며 정지된 계정이 풀리기를 기다리기

3.이의제기하기(완전 본인 컨텐츠가 아니면 사실상 쉽지 않습니다.)


이의제기 신청 기본사항

https://support.google.com/youtube/answer/2807684


https://www.youtube.com/intl/ko/yt/about/copyright/#support-and-troubleshooting

위 6가지 방법으로 저작권 관련 문제의 Trouble-Shooting을 할수 있다.


https://support.google.com/youtube/answer/6005908?hl=ko&ref_topic=2778544








▼저작권 침해로 정지받고, 해당 컨텐츠를 삭제해도 시간이 지나면 경고에서 수익창출 정지로 넘어가기도 한다.

해결책을 잘 모르겠다.

SM엔터테인먼트 쪽에서 신고를 한건 맞는데 철회하는법을 모르는듯하다.

구글코리아는 멍청해서 뭔소린지 못알아 듣는다.

YouTube에서는 질문내용을 못알아듣고 있다.



Hi there, 

Thanks for writing back.

You can email the YouTube Creator Support team for help 

if your channel has at least 10,000 lifetime views 

and you've agreed to the YouTube Partner Program terms. 

If you're having difficulties contacting us, 

it's likely because you don't meet our eligibility criteria right now.

만약 어려움이있다면 연락해라. 우리에게,

그건 ~인듯하다. because 네가 충족시키지않았기때문에 our 자격기준을 right now.

You can get more information about the recent updates 

in our YouTube Creator Blog post.

You can use one of our other resources to help:

You can find out more about the eligibility requirements and how to apply for the Partner program in the YouTube Help Center.

Once you’ve applied, you can check your application status in Creator Studio > Channel > Monetization.

Keep working on your channel and making great content.

Regards, 

April

Google YouTube Team





Hi,

We're sorry to hear that you're experiencing an issue. 

The YouTube Creator Support team is here to help you, 

but you need to take one more step to reach us.

To get help with your issue: Follow the instructions to get help as a YouTube Creator to contact us directly. 

If you're part of the YouTube Partner Program, 

make sure you're signed in to the Help Center to see the contact options. 

You can also use our creator help center and communities to find answers to your questions. 

We hope to hear from you soon!

The YouTube Creator Support team

Posted by ElectricShock
:
336x280(권장), 300x250(권장), 250x250, 200x200 크기의 광고 코드만 넣을 수 있습니다.

졸업작품 의뢰는 (▶LINK)


https://www.eeweb.com/blog/extreme_circuits/mobile-cellphone-battery-charger



Circuit Operation:
Timer IC NE555 is used to charge and monitor the voltage level in the battery.

Control voltage pin 5 of IC1 is provided with a reference voltage of 5.6V by zener diode D1.

(ex. 1N4735 ouputs 6.2V)

https://en.wikipedia.org/wiki/555_timer_IC


Threshold pin 6 is supplied with a voltage set by P1 and trigger pin 2 is supplied with a voltage set by P2. 

When the discharged cellphone battery is connected to the circuit, 

the voltage given to trigger pin 2 of IC1 

is below 1/3Vcc 

and hence the flip-flop in the IC 

is switched on to take output pin 3 high.


When the battery is fully charged, the output terminal voltage increases the voltage at pin 2 of IC1 above the trigger point threshold.

This switches off the flip-flop and the output goes low to terminate the charging process.

Threshold pin 6 of IC1 is referenced at 2/3Vcc set by P1. 

Transistor Q1 is used to enhance the charging current.

(Q1 is used as Common Base)

(SL100(=Q1) is equivalent to NPN Transistor)

Value of R3 is critical in providing the required current for charging.

With the given value of 39-ohm the charging current is around 180 mA.

The circuit can be constructed on a small general-purpose PCB.

For calibration of cut-off voltage level, use a variable DC power source. Connect the output terminals of the circuit to the variable power supply set at 7V.

Adjust P1 in the middle position and slowly adjust P2 until LED(D2) goes off, indicating low output. LED should turn on when the voltage of the variable power supply reduces below 5V. 

Enclose the circuit in a small plastic case and use suitable connector for connecting to the cellphone battery.



리튬폴리머 7.4V 충전기 모듈(KB3652-7V4)

▼무선 전력전송 부품

http://www.mcuboard.com/shop/goods/goods_view.php?goodsno=9193



위 제품 회로도는 아래 Charger회로도에 근간을 두고있다.



베터리 레벨 체크하는 회로

Battery Level Monitor Circuit (LINK)




Why your mobile phone battery have more than 2 terminals

안그래도 궁금하긴했음  왜 폰베터리가 4핀까지 있는지

각 핀은 +, BTEMP, -, BSI로 구분된다.

여기서 +, -는 폰에 전원공금을 해줄때 쓰인다.

(BSI :: Battery Status Indicator)

(BSI pin gives the information of the battery to processor)

(2:46) Charging current and status is controlled to ensure longer Battery Life.

'졸업작품 > Zener Diode' 카테고리의 다른 글

제너 + 저항 계산법  (0) 2016.05.10
Zener Diode (=제너)  (0) 2016.04.26
Posted by ElectricShock
:

NPN

2016. 6. 25. 19:54
336x280(권장), 300x250(권장), 250x250, 200x200 크기의 광고 코드만 넣을 수 있습니다.

▼2N3055 NPN TR이다.


이렇게 생긴 TR은 큰 가전제품에서 본적이 있을것이다.

헌데 Collector, Base, Emitter의 위치가 어딘지 도통 알기쉽지 않다.

아래 그림에서 확인할 수 있듯이 Collector가 양쪽에 있다.

http://www.onsemi.com/pub_link/Collateral/2N3055-D.PDF

Vcer는 Common Base를 적용시킬때의 Reverse Voltage를 의미한다. (70V)

Vceo는 일반적으로 쓰일때의 Output을 의미한다. (60V)

'졸업작품 > 기초전자' 카테고리의 다른 글

Inductance  (0) 2016.07.08
Current Sensor(=전류센서)(電流)  (0) 2016.07.07
MOSFET (feat. TR종류들)  (0) 2016.06.08
Understanding Battery (=베터리 이해하기)  (0) 2016.05.23
기초전자  (0) 2016.03.28
Posted by ElectricShock
:

BLOG main image
잡동사니들(지극히 개인취향인...) (다른글에도 댓글 부탁해요♥) You May Leave English Messages on GuestBook. by ElectricShock

공지사항

카테고리

분류 전체보기 (782)
MiDi (2)
Programming(=프로그래밍) (3)
Animation (4)
Blender (3D Graphic Program.. (10)
Blendtuts.com (Series) (1)
Blender 기초 팁들 (2)
Processing (디지털미디어과) (2)
Music (1)
Books in the world (0)
Communication(CAN, UART, et.. (12)
MCU Examples (PIC 기반) (7)
Transistor (1)
Mikro C Pro (11)
Mikro Pascal (1)
Proton IDE (0)
Robot (0)
Swift 3D (1)
Dummies Series (1)
All about Hacking (0)
제2 외국어 (1)
PIC 해외서적들 (3)
AVR (25)
PIC (MikroC) (MPLAB) (4)
Assembly (2)
ARM (3)
Arduino (26)
PSpice (1)
Proteus ISIS (14)
CodeVision (2)
FPGA (15)
MPLAB (24)
PCB (the Procedure) (15)
3D Printer (5)
PICKIT3 (6)
Matlab (11)
RaspBerry PI (15)
BeagleBone (1)
Android Studio (17)
졸업작품 (172)
Korea History (0)
Issue(사회) (73)
Multimeter 리뷰 (1)
Oscilloscope (1)
A (34)
B (19)
J (6)
C (32)
P (12)
T (37)
H (12)
I (12)
M (44)
R (5)
E (5)
F (2)
D (9)
O (2)
L (7)
S (9)
W (2)
V (6)
G (14)
Visual C++ or Visual Studio (2)
Android App Development (0)

최근에 올라온 글

최근에 달린 댓글

최근에 받은 트랙백