Programmer To Go Mode

이 Mode는 쉽게 설명하자면 Take-Out Mode이다. (아래 그림과 함께 첨부했으니 따라해보시길 바란다) 

Setting up PICkit 3 for Programmer-To-Go Operation

Before downloading a memory image 

to PICkit 3 for Programmer-To-Go operation, 

the PICkit 3 programmer software options and buffers 

should be set up as desired 

during Programmer-To-Go operation.

In fact,

it is highly recommended to test programming a target device 

from the software first, 

with all desired options, 

to ensure the device programs as expected 

 before downloading an image to Programmer-To-Go. 

Refer to the MPLAB IDE online help for information on using MPLAB IDE to program a device.

PICkit 3 Settings, Programmer to go Tab

From MPLAB IDE, 

select Programmer >> Settings >> Programmer to go Tab (Figure: PICkit 3 Programmer To Go Tab).

In the "Image Name" field,

type in the name you want to use for your programming image.

●The “Programme Settins Report panels displays the setting you’ve selected for programming the device.

If you want to change any of these settings,

use the appropriate tab in the PICkit 3 Settings dialog.

●Click Send Image In Memory to execute an image transfer to the PICkit 3 unit. 

Once the image is stored in the PICkit 3,

you no longer need MPLAB IDE or a PC to program a device. 

You can take the PICkit 3 to other locations that may not have a computer and program a device 

with the push of a button.

Download to PICkit3 Complete

After you click Send Image In Memory,

the output window displays a message 

when the download is complete.

The PICkit3 unit's Active LED should be blink to indicate it is in Programmer To Go Mode

and ready to program.