Failed to properly connect to PICkit3. (Greater V8.2 버젼 이상에서 사용가능)
2014. 12. 27. 17:40
336x280(권장), 300x250(권장), 250x250, 200x200 크기의 광고 코드만 넣을 수 있습니다.
Failed to properly connect to PICkit3.
https://www.pantechsolutions.net/project-kits/user-guide-for-pic-kit3#General Setup Setup
▲PICkit3 사용법 참고
Debugger>Select Tool>PICkit 3
Project>Build Configuration>Debug
Debugger>Run
Programmer>Select Programmer
Project>Build Configuration>Release
Programmer>Program
Project>Project Wizard
Project>Build Options>Project
View>Toolbars>Project Manager
Project>Build All
Configure >> Configuration Bits
Debugger>Select Tool>PICkit 3
Programmer>Select Programmer>PICkit 3
Programmer>Settings (덮어쓰기 설정 가능)
'MPLAB > MPLAB Errors' 카테고리의 다른 글
Target Device ID does not match expected Device ID (0) | 2017.01.20 |
---|---|
Failed to initialize PICkit3 (☞PK3Err0038) (2) | 2014.12.31 |
PICkit3 연결법 (0) | 2014.12.30 |
No configuration words in hex file.(in PICKit3) (0) | 2014.12.21 |
MPLAB IDE의 작동이 중지되었습니다. (2) | 2014.12.11 |