Failed to initialize PICkit3 (☞PK3Err0038)

02-559-2163

마이크로칩 社 한국지사 (기술부)

▼아래 참고하시고 도움되셨다면 댓글 남겨주세요(♥)

★Programmer를 None → PICkit3로 setting

현재 PICkit3라면 PICkit3→None←PICkit3로 Setting

▼자세한 설명은 아래 참고 바랍니다.

Downloading Firmware...

PK3Err0038: Failed to initialize PICkit3.

▽

http://www.microchip.com/forums/m474136-p2.aspx

1 - Open MPLAB 8.3 or 8.36 - I'm not really sure why, 

but it is this one that has PK3FW_012505.jam firmware and select PK3 programmer 

(Programmer -> Select Programmer);

2 - Connect PICkit3, 

you'll get the error 38 or so, stating that PIC is not connected;

3 - Press the button on PK3, until the blue Active light starts blinking;
4 - Go to Programmer -> Settings -> Configuration and press the Manual Download button;
5 - Choose PK3FW_012505.jam firmware and press Open;

Firmware will start downloading to PK3. You can check on the Output window.
If everything goes OK, your PK3 will revive.

 

 

JAM Files

For MPLAB IDE V8.36

PK3FW_012505.jam

For MPLAB IDE V8.92

==========================================================================

이 모드를 전환해줘야만 MPLAB에서 PICkit3의 사용이 가능해진다,

Programmer를 None → PICkit3로 바꿔주면 끝.

Click OK.

The message ""Target Device ID (0x0) does not match expected Device ID (0x27e0)",

simply means the programmer is not communicating with the device at all.
(Solution :: Configure >> Select Device >> Choose proper Device)

Programmer >> Select programmer >> PICkit3