MikroC용 Interrupt

https://electrosome.com/interrupt-pic-microcontroller/

void main()
{
    TRISC = 0; // To configure PORTC as output port
    OPTION_REG.INTEDG = 1; // Set Rising Edge Trigger for INT
    INTCON.GIE = 1; // Global Interrupt Enable
    INTCON.INTE = 1; // INT Enable
    while(1)
    {
        PORTC = 0x00; //Set some value at PortD
    }
}

void interrupt() //  ISR
{
    INTCON.INTF=0; // Clear the interrupt 0 flag
    PORTC=~PORTC; // Invert (Toggle) the value at PortD
    Delay_ms(1000); // Delay for 1 sec
}